Technical Specifications
| Isolation | Dynamic: 1.2Hz - 200Hz purely passive beyond 200Hz |
| Transmissibility |  Transmissibility above 10 Hz is always less than 0,017 (-35dB) |
  |
|
| Correction Forces | +/- 8 N vertical +/- 4 N horizontal |
| Static Compliance | approx. 3.5 µm/N vertical approx. 7 µm/N horizontal |
| Maximum load | 400 kg (single unit: 200 kg) |
| Dimensions (single unit): | Top plate : 360 x 120 mm (AVI-200S) 600 x 130 mm (AVI-200M) 820 x 130 mm (AVI-200XL) Bottom plate : 396 x 84 mm (AVI-200S) 636 x 84 mm (AVI-200M) 856 x 84 mm (AVI-200XL) Height : 112.5 mm |
| Weight (single unit): | 8 kg (AVI-200S) 10 kg (AVI-200M) 12.3 kg (AVI-200XL) |
A2CU Controller
| Safety class | 1 |
| Power consumption | Typically 9 W |
| Input voltage | 90-125VAC / 200-250VAC +/- 10% , 50 - 60 Hz |
| Overload | 8 LEDs indicate overload in input stages |
| Monitor signal | A multiplexed signal for display on oscilloscopes shows vibration levels with and without isolation - for diagnostic purposes only |
Normal Environmental Conditions
| Protection class | IP 20 |
| Temperature range | 5°C - 40°C |
| Relative humidity | 10-90 % (5-30 °C) / 10-60 % (30-40 °C) |
| Application | Indoor |
| Altitude | Up to 2000 m (6.500 ft) |
